Installation method of building safety net

- Jan 11, 2018 -

1. The Construction safety net installs when each rope must fasten on the bracket, the edge of the safety net should be close with bracket bracket, knot when to try to ensure that the knot is strong, untie the words also not trouble, to ensure that the work of the principle of force, the safety net of the rope in the installation of the tendon rope link in the stent.

2. The vertical mesh surface should be perpendicular to the horizontal plane, and the maximum seam between the working edge is not more than 10cm.

3. Building Safety Flat net mesh surface should not pull too tight, two layers of flat net spacing must not exceed 10m, flat net and the bottom surface of the minimum interval should not be less than 3m.

4. After the construction safety net installs completes, must pass through the Security Inspector Inspection completes passes through the rear to be able to use.

5. The normal use of the safety net to do irregular inspection, found falling objects in time to clean up.


Previous: Features of hoisting belt Next: What are the technical requirements for hooks?

Related Industry Knowledge

Related Products

  • Lashing of Cargo
  • Overcerter Buckle
  • Cheap Truck Winch
  • What Is A Winch Bar
  • Accessories
  • Round Sling